1. Safety First:
- Park your vehicle in a well-ventilated area.
- Disconnect the negative terminal of the car battery to ensure safety during the procedure.
2. Depressurize the Fuel System:
- Locate the fuel pump fuse or relay in the fuse box and remove it.
- Start the engine and let it run until it stalls, ensuring the fuel system is depressurized.
3. Locate the Fuel Pump:
- Refer to your car's repair manual to find the high-pressure fuel pump's location.
4. Remove Access Panels:
- Depending on your car, you may need to remove access panels or components to reach the fuel pump.
5. Disconnect Fuel Lines:
- Wear safety gloves and eye protection.
- Disconnect the fuel lines from the pump, making sure to catch any fuel that may spill.
6. Remove Mounting Bolts:
- Unscrew the mounting bolts securing the fuel pump in place.
7. Remove the Old Pump:
- Carefully take out the old high-pressure fuel pump.
8. Install the New Pump:
- Place the new pump in position and secure it with the mounting bolts.
9. Reconnect Fuel Lines:
- Attach the fuel lines to the new pump, ensuring proper connections.
10. Replace Access Panels:
- Put back any panels or components that were removed to access the fuel pump.
11. Reconnect Battery:
- Reconnect the negative terminal of the car battery.
12. Test the System:
- Turn the ignition key to the "On" position without starting the engine, allowing the fuel system to pressurize.
- Check for any leaks and listen for unusual sounds.
Remember, this is a general guide, and the specific steps for your vehicle may differ. Always consult your car's repair manual for accurate instructions tailored to your make and model. If you're uncertain, seek professional assistance to ensure the job is done safely and correctly.
F&S Always Makes You Forward.